General symptom: 1x radial (Vertical and Horizontal direction of horizontal machines)
Usually a rotor bow in a motor looks like a static imbalance. Broken bars and loose connections (at motor terminals and at MCC) cause motors to heat up (localized) owing to uneven current flow through the phases causing rotor bow — uneven weight distribution around the rotor’s centreline. Hence we see high amplitude peak at 1x running speed in the radial and horizontal directions.
Localized overheating can be seen on the motor body through infrared thermal imaging.
The effect of can also be seen on the rotating air gap — a high peak at 2xLf with pole pass sidebands around 1x and 2x peaks. The 2x peak often comes up when the effect is more severe.
The time waveform would be sinusoidal when viewed in velocity.
Phase: expect 90 degree shift between vertical and horizontal axes. The inner race will move in and out once per revolution with a bent shaft