Misalignment

Typical Symptoms: High 1x in the axial direction and 2x in the radial directions; at time 3 x is also present in severe cases (e.g. when coupled to coupling imbalance).

Reasons for misalignment:

  1. Skill
  2. Thermal growth
  3. Movement of foundation

Types of misalignment:

  1. Parallel misalignment — we would find strong presence of 2x component in radial direction along with 1x in the axial direction.  This is because two opposing forces act together at the coupling — both trying to align the shafts to each other.
  2. Angular misalignment — we would find strong presence of 1x component in the radial direction along with strong 2x in the axial direction. This is because angular misalignment produces a bending moment on both shafts.
  3. However, vibration patterns don’t change in very predictable patterns as described in points 1 and 2 above. This is because there is usually a mix of the two different types of misalignment. In addition foundation problem and stiffness (directional or variable) create further complexity in the situation.
  4. The 1x and 2x components would be strong in the radial directions (V and H) but these components would be in phase.

Usually we would find high 1x peak in the axial direction with small 2x and 3x peaks depending on the “linearity” of the vibration. There may be both 1x and 2x (at times accompanied by 3x) in the radial directions.

Time waveform in the axial direction would be dominated by sinusoidal 1x vibration

Phase: Motor and say Pump would be out of phase axially due to angular misalignment (across the coupling in the same direction).

 

Dibyendu De

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s