Eccentric Gears

Typical Symptoms: 1x radial (in Vertical and Horizontal directions)

Like eccentric pulleys, Eccentric gears generate strong 1x radial components, especially in the direction parallel to the gear.

They would also generate sidebands of the running speed of the eccentric gear around the GMF (gear mesh frequency). However, harmonics of GMF may also be generated (depends on the severity of the problem). Natural frequency might also be excited.

Time waveform: The waveform will have combination of 1x running speed of input and output shafts plus strong gear mesh vibration modulated by the running speed of the shaft having the eccentric gear.

Phase: Not applicable.


Eccentricity in general

Symptoms are generally 1x radial (Vertical and Horizontal for a horizontally mounted machine).

Eccentricity occurs when the centre of rotation is offset (like offset misalignment) from the geometric centreline of a gear, motor rotor or a pulley.

It would generate strong 1x radial peak — in the direction parallel to the rotor/gear/pulley. This condition is common and mimics unbalance.

For gear eccentricity we would see 1x sidebands

For motor rotor eccentricity we would see pole pass sidebands.

Time waveform would be sinusoidal when viewed in velocity. Vibration from gear will also have gear mesh vibration and modulation of the turning shaft of the offending gear.

Phase: If belt driven, phase readings taken parallel and perpendicular to belts will either be in phase or 180 degrees out of phase. For a direct driven component, vertical and horizontal readings will be 90 degrees out of phase.